New Home

Cable Tester Firmware & Software Downloads

Version Release Notes Downloads Date
Reporting Application Version 2.50.zip Zip (400k) 2016-Sep-28
Cable Tester Version E 1.361.cyacd Cable Tester Version E 1.361 Release Notes
Zip (150k) 2016-Sep-28
Cable Tester Version L 1.352.cyacd Cable Tester Version L 1.352 Release Notes
Zip (150k) 2015-Feb-18
Cable Tester Version C 1.352.cyacd Cable Tester Version C 1.352 Release Notes Zip (150k) 2015-Feb-18

 

Cable Tester Application Installation

Please uninstall previous application versions before proceeding with upgrade installation.

  1. Download the Reporting Application
  2. Save the Reporting Application Version x.xxx.zip file to your computer. Double-click on it, and open the folder and then double-click on “setup.exe” to begin the installation.
  3. Once the Reporting Application is installed it will be available in the Windows Start Menu under programs. Look for Reporting Application.
  4. Power on your Cable Tester and plug it into your computer using the included USB cable.
  5. Open the Cable Tester application by double clicking on the application shortcut.
  6. Click on Read Tester to load the test results from the Cable Tester to your PC.
  7. To save test results from your PC to your Cable Tester, click on “File”, Open, and then select the desired file. Once the file is opened, click on “Write Tester”.

Cable Tester Firmware Update

  1. Before downloading the Firmware update, you must check which Firmware file is compatible with your Cable Tester. There are three versions that are defined by the letter “L”, “C” or “E”. (Version L x.xx, Version C x.xx, Version E x.xx).
  2. To identify which version to download; power on the Cable Tester, select the settings soft key and the Firmware version will be displayed at the top of the screen. If the Firmware version contains “L”, download the Firmware file containing the “L”. If the Firmware file contains “C”, download the file containing “C”. If the Firmware file contains “E”, download the file containing “E”.
  3. Download the current firmware update..
  4. Power on your Cable Tester and plug it into your computer using the included USB cable.
  5. Open the Cable Tester application by double clicking on the application shortcut.
  6. Click on “Load File”, navigate to and click on the Firmware file you downloaded then click on Open.
  7. Click on “Begin Download”

If an error occurs during the download process, follow the steps below:

  1. Close the Cable Tester application.
  2. Reset the Cable Tester by removing a battery and reinserting it. Note: the Cable Tester screen may remain dark, which means it is in Firmware update mode.
  3. Restart the application. It will display “Cable Tester Attached” at the bottom left of the screen.
  4. Follow the Cable Tester Firmware Update instructions above.